CT-32 Cargo Truck

Armed Forces of Gondara  ›  Gondaran Military Equipment  ›  CT-32 Cargo Truck

CT-32 Cargo Truck
The backbone of Gondaran motorized logistics in standard troop transport configuration.
General Characteristics
Classification	Standardized 2.5-ton 6×6 Motor Transport
Type	Medium Troop and Cargo Transport
Origin	Gondara
Manufacturer	Gondaran State Arsenals
Used By	Army of Gondara
Design Date	1932
Service Entry	1935
Unit Cost	2,450G (Standard)
Crew	1
Passengers	12 (Full Infantry Squad)
Technical Data
Weight	~8,800 lbs (Curb)
Dimensions	21 ft (L) × 8 ft (W) × 8.5 ft (H)
Ground Clearance	10 in
Engine	Gondaran G-270 Inline-6 Gasoline
Fuel Capacity	50 Gal
Power	104 hp @ 3000 RPM(17.3 hp/ton)
Torque	222 lb-ft @ 1000 RPM
Transmission	5-speed manual (with Crawler Gear)
Suspension	Solid Axle, Leaf Spring
Range	50 Gal- 7-10 mpg (350 miles)
Speed	~50 mph (Unloaded)
Utility & Logistics
Payload / Towing	5,000 lbs (2.5 Tons)/ 3,500 lbs (Optimized for 56.25mm AT)
Wheel Standard	Shared with Battalion heavy Towed Systems
Equipment	Universal MG Mount (UMGM); Front Mechanical Winch
Combat Data
Armament	None; supports VMG-33 or HMG-34 ring mount
Armor	None
Communications	Optional R-12 Battalion-link Radio

_TOS_

Overview

The CT-32 is the standard medium transport vehicle of the Army of Gondara. Designed as a 2.5-ton 6×6 motorized platform, The basic cargo versions were designed to transport a cargo load of nominally 2+1⁄2 short tons (5,000 lb; 2,300 kg) over all terrain, in all weather. In on-road service the load weight was doubled. It serves as the primary means of infantry mobility, enabling rapid deployment, organized dismount, and sustained operational movement.

The CT-32 is built to transport a full 12-man infantry squad as a single unit while supporting the mounted operation of crew-served weapons through the Universal Machine Gun Mount (UMGM) system.

The vehicle emphasizes durability, simplicity, and battlefield practicality over refinement, forming the backbone of Gondaran motorized infantry doctrine.

---

Design Characteristics

The CT-32 is built upon a reinforced, high-tensile steel 6×6 chassis engineered to maintain structural integrity under a full 2.5-ton payload. The heart of the platform is the Gondaran G-270, a 4.4-liter gasoline inline-six engine producing 104 hp and a peak torque of 222 lb-ft. This high-torque output is managed by a heavy-duty 5-speed manual transmission featuring an ultra-low "crawler" first gear, specifically geared to enable the towing of 56.25mm anti-tank guns through deep mud or up steep inclines without stalling.

Tactical mobility is provided by a three-axle, all-wheel-drive system utilizing locking differentials and a dual-range transfer case. A robust solid axle leaf spring suspension ensures the vehicle remains stable during high-speed convoy movement while providing the necessary ground clearance for off-road maneuvers. The rear cargo area is optimized for the "Mobile Infantry" doctrine, featuring an open troop bed with inward-facing bench seating for a full 12-man squad, configured for a "center-aisle" rapid dismount under fire.

---

Field Serviceability

The CT-32 is engineered for straightforward maintenance under field conditions. Routine service procedures are supported by:

• Standardized mechanical components across the fleet
• Accessible engine and drivetrain layout
• Clearly marked service points
• Basic tool compatibility with battalion motor pool equipment

The design allows field crews and motor pool personnel to perform repairs with minimal specialized equipment, ensuring continued mobility during sustained operations.

---

Operational Use

The CT-32 is employed as the primary transport platform for Gondaran line infantry units and is integral to all levels of motorized operations.

It is commonly used for:

• Infantry squad transport
• Movement of heavy weapons teams
• Ammunition and equipment transport
• Towing light artillery and support systems
• Convoy operations and rapid redeployment

The vehicle allows units to arrive at the battlefield in organized formation, enabling controlled deployment and immediate transition into defensive positions.

---

Configurations

The CT-32 is designed as a flexible platform and may be reconfigured depending on mission requirements. Common configurations include:

The standard configuration has a rack on both sides of the bed that carries four 5-Gal fuel canisters per rack, allowing 40 gal of fuel total.

• Troop Transport Configuration — full 12-man squad with equipment CT-32-T
• Weapons Carrier Configuration — mounted crew-served weapon with reduced passenger load
• Cargo Configuration — increased payload capacity with seating removed CT-32-C
• Medical Configuration — stretcher-based casualty transport CT-32-A
• Support Configuration — tools, communications, or logistical supplies CT-32-S
• Tanker Configuration - 750 Gal Capacity, CT-32-TW (Tanker Water, and CT-32-TF (Tanker Fuel)

---

Armament

The CT-32 is not a dedicated combat vehicle but is fully compatible with the Universal Machine Gun Mount (UMGM) system.

This allows mounting of approved crew-served weapons, including:

• LMG-25
• VMG-33
• HMG-34

When equipped, mounted weapons are operated in a combat-ready state during movement and provide:

• Convoy security
• Immediate response to ambush
• Overwatch during deployment

Armament is mission-dependent and centrally controlled within unit doctrine.

---

Sustainment

Standard Squad Storage Bench Loadout

The CT-32 troop transport configuration includes an integrated rear storage bench used for carrying squad-level ammunition, sustainment supplies, and emergency reserves. The bench is designed to balance firepower, survivability, and mobility without overloading the vehicle.

Priority	Category	Item	Quantity	Weight Each	Total Weight	Notes
1	LMG Ammunition	LMG-39 Drum Ammo Boxes (6 drums each)	4 boxes	32 lb	128 lb	Primary automatic weapon reserve (1,200 rounds total)
2	Grenades	GL-34 37.5mm Grenades	24	0.5 lb	12 lb	Squad explosive reserve
3	Rifle Ammunition	6.25×48mm (stripper clips)	2,000 rounds	0.037 lb	74 lb	Rifle and DMR resupply
4	SMG Ammunition	9.375×25mm	600 rounds	0.035 lb	21 lb	SMG and pistol resupply
5	Sustainment	Field Rations	24 man-days	2 lb	48 lb	2 days for full 12-man squad
6	Water Reserve	2-Quart Canteens (filled)	12	4.5 lb	54 lb	Emergency water supply (6 gallons total)
7	Medical	Bandages	48	0.25 lb	12 lb	Casualty reserve
Subtotal					349 lb

---

Bench Capacity

Parameter	Value
Bench Dimensions	5 ft × 3 ft × 2 ft
Internal Volume	30 cubic ft
Recommended Load Limit	500 lb
Current Load	349 lb
Remaining Capacity	151 lb

---

Notes

• The storage bench is partitioned to prevent shifting of ammunition and supplies during movement.
• Ammunition is prioritized to support squad-level automatic and rifle fire before sustainment items.
• Rifle ammunition is carried in stripper clips to reduce weight and space compared to loaded magazines.
• The remaining capacity allows for mission-specific equipment, additional ammunition, or specialty supplies.
• Total bench load is intentionally kept below maximum capacity to preserve vehicle mobility and handling.

Limitations

Despite its effectiveness as a transport platform, the CT-32 has several inherent limitations:

• No armor protection for crew or passengers
• Limited off-road performance in extreme terrain
• Vulnerability to concentrated fire and ambush
• Reduced mobility under maximum load conditions
• Dependence on maintenance support for sustained operations

---

Summary

The CT-32 serves as the foundational transport platform of Gondaran motorized infantry forces. Combining reliability, simplicity, and adaptability, it enables coordinated movement and deployment at the squad level while supporting integrated crew-served weapon systems.

Its standardized design and compatibility with the UMGM system ensure that Gondaran units remain mobile, organized, and combat-ready throughout all phases of operation.

---