AV-35-C

Main Page  ›  Armed Forces of Gondara  ›  Gondaran Military Equipment  ›  AV-35-C

AV-35-C
AV-35-C mechanized assault carrier
General Characteristics
Classification	Mechanized Assault Carrier
Type	Tracked armored troop transport
Origin	Gondara
Manufacturer	Key Weapons Logistics (KWL)
Used By	Army of Gondara
Design Date	1935
Service Entry	1938
Unit Cost	$33,000 USD (1935)
Crew	3
Passengers	9
Technical Data
Weight	18 tons
Dimensions	19 ft (L) × 9 ft (W) × 8 ft (H)
Ground Clearance	18 in
Engine	D-8A (V8 Naturally Aspirated Diesel)
Fuel Capacity	120 gal internal (+120 gal external breakout tank)
Power	270 hp(15 hp/ton hp/ton)
Torque	~950 lb-ft
Transmission	5-speed manual with low-range gearing
Suspension	Torsion bar
Range	180 mi (road), 90 mi (off-road), up to 360 mi with breakout tank
Speed	38mph (road), 4 mph (water)
Utility & Logistics
Payload / Towing	Infantry squad transport/ 8 tons practical; 12 tons emergency
Wheel Standard	Wide low-pressure track
Equipment	Amphibious capability; aircraft sight; breakout fuel tank
Combat Data
Armament	Dual 12.5mm HMG turret (1,500 rounds)
Armor	Light sloped armor with optional expansion plating
Communications	Standard vehicle radio

---

Overview

The AV-35-C is the primary mechanized assault carrier of the Army of Gondara and the most widely produced member of the AV-35 family. Developed during the interwar period as part of Gondara's mechanization program, the vehicle was designed to transport Assault Infantry under armor while providing direct fire support during offensive operations.

Although commonly classified as a troop carrier, the AV-35-C occupies a far more significant role within Gondaran military doctrine. The vehicle served as the production foundation of the broader AV-35 program and became the basis upon which the Army's mechanized logistics, maintenance, training, and recovery systems were organized.

By concentrating production around a common armored chassis, Gondara accepted a higher procurement cost for transport vehicles in exchange for simplified manufacturing, reduced logistical complexity, and the ability to rapidly expand mechanized forces during wartime.

---

Development

Development of the AV-35-C began in 1935 under the direction of Key Weapons Logistics (KWL). Army planners sought a vehicle capable of transporting a full Assault Infantry squad while remaining compatible with a standardized armored vehicle architecture intended to support future reconnaissance, recovery, command, artillery, and tank variants.

Rather than developing a dedicated personnel carrier, engineers were instructed to build the vehicle around a common chassis capable of supporting substantially heavier future vehicles. This decision increased initial development complexity but dramatically simplified future production and logistics.

Early prototypes revealed several challenges. The suspension system, transmission, and structural components were originally engineered to support vehicles significantly heavier than the carrier itself. Test crews reported a harsh ride and excessive pitching during high-speed cross-country movement. Engineers ultimately refined damping systems and internal weight distribution while preserving the common architecture required by the AV-35 program.

The vehicle entered service in 1938 and quickly became the most numerous member of the family.

---

Design Characteristics

The AV-35-C employs the standard AV-35 hull, drivetrain, suspension system, and D-8A diesel engine. Approximately ninety percent of its components are shared with other members of the family, allowing mechanics, recovery crews, and Warrant Officers to operate across multiple variants with minimal additional training.

The front-mounted engine compartment provides an additional layer of protection between enemy fire and the troop compartment while allowing infantry to embark and disembark through the rear of the vehicle. Wide low-pressure tracks distribute vehicle weight effectively across soft ground and contribute to the platform's amphibious capability.

Although weighing only eighteen tons in combat configuration, the carrier utilizes a chassis originally engineered to support substantially heavier vehicles. While this approach resulted in a vehicle that was occasionally criticized as overbuilt for its role, it formed the foundation of the Army's standardization philosophy and enabled the development of numerous specialized variants without major redesign.

---

Protection

The AV-35-C utilizes the standard armor architecture employed throughout the AV-35 family. Gondaran planners deliberately standardized protection levels across combat and support variants in order to simplify production, battlefield repair, and logistical support.

The vehicle was designed to protect its crew and embarked infantry from small arms fire, shell fragments, heavy machine gun fire, and the battlefield hazards commonly encountered during mechanized assaults. Survivability was further enhanced by the placement of the engine compartment forward of the troop compartment and by the vehicle's heavily compartmentalized internal layout.

Most combat variants of the AV-35 family were capable of accepting field-installed expansion armor packages. These systems were normally fitted only when extended operations or elevated threat conditions were anticipated.

---

Crew and Troop Compartment

The AV-35-C is operated by a three-man vehicle crew consisting of a Driver, Gunner, and Vehicle Commander.

Behind the crew compartment is space for a nine-man Assault Infantry squad. Gondaran doctrine treated the squad and vehicle as a single combat system rather than separate organizations temporarily grouped together for transportation.

In addition to transporting personnel, the carrier was designed to transport significant ammunition and sustainment reserves. Standard doctrine called for each vehicle to carry sufficient supplies to fully replenish its embarked squad multiple times during the opening stages of combat operations.

This arrangement allowed Assault Infantry formations to establish and hold objectives until relieved by follow-on Mobile units.

Squad Ammunition Reserves

The AV-35-C carries sufficient ammunition to provide approximately three complete combat reloads for its embarked Assault Squad. These reserves are stored internally within armored ammunition lockers and are intended to sustain offensive operations during the opening stages of combat before company-level resupply becomes necessary.

Ammunition Type	Squad Combat Load	Vehicle Reserve (3 Reloads)
6.25mm Rifle Ammunition	1,750 rounds	5,250 rounds
9mm SMG Ammunition	120 rounds	360 rounds
LMG-39 Drum Magazines	4 drums (200 rounds)	12 drums (600 rounds)
GL-34 HE Rounds	9 rounds	27 rounds
GL-34 Smoke Rounds	2 rounds	6 rounds
GL-34 Illumination Rounds	1 round	3 rounds
P-32 Pistol Ammunition	48 rounds	144 rounds
Fragmentation Grenades	36	108
Smoke Grenades	18	54

---

Armament

The primary armament consists of a turret-mounted twin 12.5mm heavy machine gun system. The weapon was selected to provide reliable suppressive fire against infantry, field fortifications, transport vehicles, and lightly protected targets while remaining compact enough to preserve troop carrying capacity.

The turret incorporates aircraft sighting equipment and a high-elevation mount, allowing limited engagement of low-flying aircraft when necessary. While not intended to replace dedicated anti-aircraft systems, the arrangement provided Assault Infantry formations with an additional measure of protection against aerial attack.

During offensive operations the vehicle was expected to remain actively engaged after infantry dismounted, providing suppressive fire and supporting the advance of the embarked squad.

---

Operational Use

The AV-35-C was developed specifically to support Gondaran Assault Infantry doctrine. Rather than serving as a simple battlefield taxi, the vehicle was intended to deliver infantry directly into combat while remaining an active participant in the engagement.

During offensive operations carriers transported assault squads to the objective, provided suppressive fire during dismount, and continued supporting infantry once combat was underway. Vehicle commanders coordinated closely with squad leaders to ensure the carrier's mobility, firepower, and sustainment capacity remained integrated into the assault.

The vehicle's amphibious capability further increased operational flexibility by allowing formations to cross rivers, wetlands, and other natural obstacles without requiring dedicated bridging assets.

Because the AV-35-C formed the foundation of the broader AV-35 ecosystem, it also became one of the most strategically important vehicles in Gondaran service. The carrier's widespread production established the manufacturing base, maintenance infrastructure, spare parts network, and training system that would later support the entire AV-35 family.

---

Breakout Fuel System

All AV-35 chassis were designed with provisions for a standardized external breakout fuel tank system. These tanks were not normally carried during combat operations and were not considered part of the vehicle's standard combat configuration.

Instead, breakout tanks were issued for missions requiring exceptional operational range, including strategic redeployments, deep penetrations, long-range raids, and rapid mechanized exploitation operations. Once fuel had been consumed, the tanks could be discarded prior to combat without affecting the vehicle's normal combat capability.

This system allowed commanders to significantly increase operational endurance while preserving the carrier's standard combat weight and amphibious characteristics.